GDATA TOOLS:
Download GDATA tools
HOW TO INSTALL G DATA:
Downloading and installing a program is easy. If you can't do it, you definately need to take a basic computer skills class. We do not have the time to walk you through this, but we can do it for you much faster. Here are the steps:
- Make sure you have your product activation key handy, and don't loose it
- Click here if you purchased a G Data AntiVirus key, then download a trial version of G Data AntiVirus
or...
click here If you purchased a G Data Internet Security key, then download a trial version of G Data Internet Security
- Uninstall your old antivirus and re-start your computer
- Start installing the "full version" of G Data...
- Choose "Custom Setup" so you can choose which features you want...
- After the restart, click on "Perform Updates (recommended)"...
- Now click the button that says "Register with server"... Do not enter a User name and Password unless you are re-installing a previously registered G Data in the same computer
- Install the Registration number (Key) you purchased, your name, etc. and finish installing G Data. If you bought a 3-pac license, use the same key (and email address if you want), but change one of the name fields to differentiate between computers (ie Brian Office, Brian Server, Brian Counter). Do not select "I am already a G Data customer" unless you are re-installing a previously registered G Data in the same computer
.
- Right-click on the red icon in the task bar near the clock, and select "Start G Data..."
- Click on the "More functions" link and select "Schedule..." to set an appropriate time to run an automatic virus check...
- G Data will send you an email. Print it out and don't loose it. You'll need it if you have to re-install G Data
WHY IS MY COMPUTER RUNNING SO SLOW?
The CPU in your computer is probably running at the same speed it always did, it's just having to handle way more data. This is usually caused by users installing a bunch of parasitic, resource hogging programs, and a lack of professional maintenance. Nearly all users and many technicians don't know how to properly uninstall programs, or how to properly clean, repair, optimize, maintain and protect a computer. Most users also have unreasonable performance expectations from a 5 year old bargain computer that's never been upgraded or had an annual service.
Don't install software that you don't need. Things like redundant toolbars, free games, screensavers, and even animated icons all take their toll. Games are notorious for loading a ton of junk into the registry. Like many smart companies, we have a strict policy against installing software that hasn't been specifically permitted or approved by us. You can't expect a computer to keep running smoothly if you keep on filling it with more stuff.
Some programs will bring your computer to a crawl because they require a huge amount of system resources. If your computer's resources are almost used up, installing one more program could bring it to a stop. Picture a small truck stacked full of wet wood dragging it's sagging rear end down the road on bulging tires. Now picture it broken down, and a similar truck carrying a presto log blowing past it like a Ferrari Enzo.
Bloatware is also to blame. As software evolves it gets bigger, and more system resources are needed. Now we recommend at least 1GB of RAM memory to run Windows XP, and at least 2GB for Windows Vista, 4GB is better. Updates and plug-ins also eat up more system resources. Make sure your computer meets the recommended system requirements before you install any software. Forget the minimum requirements, unless you like going for coffee between every mouse click.
Uninstalling unused programs helps. Your registry and files will still be fragmented, you'll have orphaned files and folders, leftover registry entries, and path statements that send your computer off searching for files that don't exist. That's another reason why businesses should have ongoing maintenance, and home users should at least have an annual service.
Age is also to blame. For a business it is usually cost effective to replace your computers every 3 to 5 years. Home users tend to try and go 5 to 7 years. As computers age, compatibility, functionality, performance and stability all start to become problematic. Hardware failures and down time start adding up. Usually several years after the release of an operating system, Microsoft Support Lifecycle ends and patches, fixes and updates for security exploits and other problems, are no longer developed.
The bad guys are also to blame. Security should be your priority these days. That means to reduce your potential for loss and liability, you need to take reasonable steps to protect your home, family, bank account, identity, business, and your customer's personal information. You would be wise to consider our bolt-down cages, backup options, top-rated security software, and maintenance options like our tune-up special.
AntiVirus programs use resources to monitor your computer's security. Some use more than others, and some slow your computer down way too much. GDATA has a small footprint, but on an out-dated and/or over-loaded computer, it can appear as if it is GDATA that is causing the problem. If that's the case, it's probably time for a professional tune-up, upgrade, or new computer. You may want to try some of the solutions in the section below.
HOW TO SPEED UP G DATA
G Data consistantly has the highest detection rate of all - This is because it uses 2 top-rated scanning engines (Engine A belongs to Avast AntiVirus, while Engine B is that of BitDefender AntiVirus). G Data has a very small footprint, so if your computer can't handle it, get a tune-up, upgrade, or replacement. Here's some tips on how to correct common mistakes, and speed things up if you must.
Disable "on access" background scanners - This is very common. Windows Defender (MsMpEng.exe) uses about 8 megabytes at idle, and more when scanning. Defender and OneCare (Microsoft Live) will automatically scan every file being accessed. This is redundant, and these background scanners have much lower detection rates, so shut them off.
Uninstall conflicting AntiVirus programs - This is very common. You can only have one AntiVirus installed.
Disable scan at startup - This is very common. If you don't want it to scan at startup, shut it off.
Set or change the Automatic Scan time - If a scan starts while your using it, stop it or schedule a new time. Right-click the G Data icon and select "Start G Data...", click the "More functions" link, click "Schedule", make sure the checkbox under "Automatic virus checks" is checked, and set a time when the computer isn't going to be used for a few hours.
If you have so much data that it takes more than a few hours to scan, you can also choose to scan with only one engine, but it would then be best to manually alternate engines regularily.
To speed up scans - If you have a lot of data on your computer, scans will take a long time. Scanning 40 gigabytes of data can take 2 hours or more. You can cut down on scan time by migrating archivable data to external drives, disks, or other storage mediums. You can also configure it to not scan archives.
To speed up Internet browsing - Banners, Flash, Animated graphics, JScript and VBScript can contain malicious code. Most websites use these, and scanning every item on a web page takes time. All the links under the "Internet" section can be used to configure G Data to your liking.
To speed up Email - Under the "Email" section, select "Options" and uncheck both "Check unread mails on program start-up (Microsoft Outlook only)", and "Check mails before sending". You scan regularily don't you, and your email is checked as you receive it, so mail you send shouldn't need scanning.
If you have Outlook installed, when you install G Data, it will automatically integrate a plugin into Outlook. This allows you to right click a mail folder and scan it, or you can find a "Scan folder for viruses" function in the Tools menu. This manual scan can be slow, especially if you don't clean out or archive your email regularily.
To speed up everything - Under the "Virus check" section, select "Options". Under the "Monitor" tab, choose to use only one engine, but be sure to turn both engines back on and manually run a full scan on a regular basis.
To speed up boot time - Many critical updates and Windows repairs take place during shutdown and restart. G Data's thorough protection adds about 20 seconds, but like Martha says, "It's a good thing", so just be patient!
Client Server slow downs - The Monitor feature monitors all access to files in the background, and checks opened and saved files for viruses. This usually causes a delay that is hardly noticeable. If a program opens lots of files, or opens some files frequently, the delay can be considerable. To fix this, temporarily disable the Monitor and see if the delays stop.
If the affected computer accesses files on a server, you also have to disable the Monitor on the server.
If the Monitor is the cause, you can usually speed things up by defining an exception (that is, files that should not be checked). To do this, you have to identify the files that you access frequently.
The MonActivity programme (see link above, or look in the Tools directory on the CD) shows all files checked by the Monitor. In the Computer input field, enter the name of the computer that you wish to monitor and click on the Connect button. (You can leave the input field blank, if you want the Monitor to connect to the computer that started the programme.) Next, perform the operations causing the delay with the Monitor enabled. The list shows all files checked by the Monitor. Define an exception (Monitor task section, Exception button) for frequently checked files. Known delays: Use of some HP printers with MS Office (exception: HP*.INI) Mail software Eudora (exceptions: EUDORA.INI DEUDORA.INI)
|